8anet go http://www.8anet.com facebook
   Product  |  New  |   |  About Us  |  Contact Us  |  Clients  |  Join Us  |  Support/RMA  |  Colocation
         
 
    My account     My Cart     [ Log In ]   

Microsemi Adaptec SCSI AAA RAID Option Card ARO-1130SA (ARO-1130B) PCI RAIDPort 133Mbps UltraSCSI 1662406-01 Bulk
Price: $ 70.00 / Each
Qty:
More Product Pictures
Product Code: CT-AT-ARO1130B
-----------------------------------------------------------
Skip Navigation Links
Product Description:

Adaptec AAA RAID Products
SCSI RAID Option Card ARO-1130SA (ARO-1130B)

Mfg. Part Number:
Adaptec 1662406-01, Bulk without accessory.

Features & Benefits:
Adaptec's ARO-1130SA RAID option card optimizes performance and provides fault-tolerant storage for entry-level servers. Systems with embedded Adaptec AIC-7895 or AIC-7880 Ultra SCSI chips can be easily upgraded from SCSI to RAID by installing this low-cost option card. This card is ideal for improving data availability without sacrificing performance in systems with a PCI-RAIDport II connector on the system motherboard. The ARO-1130SA RAID option card utilizes the already embedded Ultra SCSI chips as RAID channels to reduce complexity and cost. It supports Wide Ultra SCSI, Fast/Wide SCSI and SCSI devices from major vendors and works under Windows NT and Netware operating systems. RAID levels 0 (striping), 1 (mirroring), 0/1 and 5 are supported by the ARO-1130SA. The card uses Adaptec's AIC-7815 RAID co-processor to manage DRAM memory and offload RAID 1 secondary writes and RAID 5 parity calculations from the host CPU, freeing it for other tasks. Advanced RAID features include hot spare support, hot swap of drives, SAF-TE support, hot spare testing, user-defined rebuild and verify priority, bootable array support and array status and monitoring and event notification. The ARO-1130SA is easy to install with Adaptec's ArrayConfigSA software. Just install the option card into the RAIDport II PCI slot, run the software and follow a few simple menu-driven steps to configure drives into arrays. Fault tolerance is enhanced because users can set up initial array configuration before installing the operating system. Adaptec's CI/O Management Software provides convenient array management allowing users to troubleshoot problems remotely, schedule management activities and keep track of everything that happens via event logs. Drives equipped with Self-Monitoring, Analysis and Reporting Technology (SMART) report predicted failures to the CI/O Management software. This advanced warning allows network managers to activate a spare remotely before problems arise. This option card uses two SCSI channels, supports up to 15 devices per channel and features Bus Master DMA interface protocol.

  • Enables Adaptec Ultra SCSI chips on the motherboard to perform as SCSI RAID channels
  • Supports RAID levels 0 (striping), 1 (mirroring), 0/1, and 5.
  • Improves performance using Adaptec’s AIC®-7815 RAID co-processor
  • Makes installation quick and easy with Adaptec ArrayConfig™ SA software
  • Simplifies array management with easy-to-use Adaptec CI/O Management Software™

    Specification:
  • Computer Bus
    32-bit PCI Local Bus plus RAIDport II connector
  • Interface Protocol
    Bus Master DMA
  • Host Bust Data Transfer Rate
    Up to 133 MByte/sec burst rate
  • SCSI Synchronous Data Rate
    AIC-7895: up to 80 MByte/sec (40 MByte/sec per channel)
    AIC-7880: up to 40 MByte/sec per channel
  • Device Protocol
    Ultra SCSI, Fast, and Wide (8- and 16-bit) 20 MHz
  • Advanced RAID Features
    RAID co-processor
    Hot spare (pool and dedicated)
    Hot swap of drives
    Array configuration on disk
    SAF-TE support
    User-defined rebuild priority
    User-defined verify priority
    Bootable array support
    Hot-spare testing
    Scheduler for rebuild, verify, and hot-spare testing
    Array status monitoring and event notification
    User-selectable broadcast and monitoring
    Adjustable stripe width
  • Advanced Hardware Features
    60 NS EDO DIMM memory
    Flash upgradable firmware and BIOS
  • SCSI Channels
    AIC-7895 or AIC-7880 motherboard Ultra SCSI chip connected to RAIDport II slot
  • Device Support
    Up to 15 HDD/non-HDD SCSI devices per motherboard channel
  • Array Support
    Drives can be configured for RAID levels 0, 1, 0/1, and 5.
    Drives can also be supported in non-array configurations
  • Operating System Support
    Windows NT 4.0
    NetWare 4.11 and 3.12
  • Remote Management
    Windows 3.x
    Windows 95
    Windows NT 4.0 and 3.51
  • Dimensions
    4.200" x 6.875" (10.668cm x 17.463cm)
  • Power Consumption
    5V +/- 5%
  • Temperature
    Operating: 5°C to 55°C
    Storage: -55°C to 95°C
  • Humidity
    Operating: 20% to 90%, non condensing

This product is not refundable due to manufacturer return policy. We only replace or repair defective product by RMA procedure.
Terms of Use | RMA Procedure | Privacy Policy. Copyright ©1999-2019 8aNet All Rights Reserved.
Designated trademarks and brands are the property of their respective owners. 
Any concern or issues please contact sales@8anet.com.