Acme H4-102L4 socket H4 short 1U Front Access server.

This system is with special features--- front I/O,  4 GbE (can add more), new Xeon E3 v5 computing power. It is good for industry controller, router, or small server.

1U 17-inch rackmount system with Intel LGA1151 Xeon E3-1200 v6 series processors.

CPU Sockets: 1
Memory Dimms: 4 (DDR4)
PCI Slots: 1, PCI-e x8 3.0 (riser card option)
Extension Bays: 2 HDD 3.5" bays or 4 of 2.5" bays

CPU: 1
LGA1151 socket H4.
Intel® Xeon® E3-1200 v6 series, Intel® 7st Gen Core i3, Intel® Pentium® and Celeron processors.

Memory: 4
4 DIMM sockets
Supports up to 32GB of Unbuffered ECC DDR4 2133MHz memory. 2-channel for best performance.

Slots and Bus: 1
1  PCI-e x8 3.0 slot.
add riser card option
1 socket PCI-E 3.0 x2  - M.2 Form Factor: 2280 (accept M.2 NVMe drive)

Integrated with:
8 Serial ATA (SATA3) ports - 8 of 6Gbps (Intel C236), RAID 0, 1, 5, 10 support
4x Intel® i210AT Gigabit Ethernet. Supports 100/1000BASE-T, RJ45 ports
Up to 11 USB (Universal Serial Bus) ports,

• 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
• 6x USB 2.0 ports (2 rear + 4 via header)

VGA - On-board AST2400 BMC graphics.

TPM  - 1x TPM 1.2 20-pin Header

2 COM ports (1 internal, 1 external).

SATA DOM power connector support.
IPMI 2.0 with Dedicated LAN port, remote KVM remote management.  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Chipset:
Intel C236 PCH chipset

Case: 1U
Front Access 1U RackMount case with 350W power supply, 2 of 3.5" HDD bays (option for 4 of 2.5" bays).
cooling fans, CPU cooling kit included.

dimension  - Width: 17.2 in. Height: 1.7 in. Depth: 16.9 in.

--- Front access I/O connectors: 4 x RJ45 Gigabit Ethernet, IPMI RJ45, VGA, Serial port, 4 USB, add-on card.

*** slide Rail, Processor, Memory and hard disk drive are not included, no FDD, no CD ROM.