Supermicro Intel E5-2600v3 4U FatTwin^TM

FatTwin^TM 4-Node Rear I/O, 8 Hot-swap 3.5" HDDs per 1U

Manufacturer Part Number:

Supermicro SYS-F628R3-RTBPT+, Black Color
RoHS Compliant

Specifications:

Key Factor
Server Type: 4U Rackmount
CPU Socket: 2
Memory Dimm: 16x DDR4, up to 1TB
HDD Bay: 8x 3.5" Hot-Swap SATA3
Expansion Slot: 1 PCI-E 3.0x16 low-profile (via riser card) and 1 Micro low-profile PCI-E 3.0x8

Onboard RAID Controller: Intel C612 controller for 10 SATA 3.0 (6 Gbps) ports; RAID 0, 1, 5,10
Power Supply: 4 x 1280W Redundant Platinum Level
Networking: 2 x 10GbE ports
 

Product SKUs SYS-F628R3-RTBPT+ SuperServer F628R3-RTBPT+ (Black)   Motherboard Super X10DRFR-T   Processor/Cache CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) Cores / Cache Up to 18 Cores / Up to 45MB Cache System Bus QPI up to 9.6 GT/s Note ** Please contact your Supermicro sales representative for additional details.   System Memory Memory Capacity 16x 288-pin DDR4 DIMM sockets Up to 1TB ECC LRDIMM, 512GB ECC RDIMM Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C612 Express chipset SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics ASPEED AST2400 BMC   Input / Output (per node) Serial ATA 8x SATA3 (6Gbps) ports 2x SATA3 powered ports that support SATA DOM LAN 2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port USB 2x USB 3.0 ports VGA 1x VGA port Serial Port / Header 1x Fast UART 16550 port   Management Software SuperDoctor® 5 Watch Dog NMI IPMI 2.0 SMCBU and SMM Power Configurations ACPI / APM Power Management Power-on mode for AC power recovery

Chassis Form Factor 4U Rackmount Model CSE-F424AS-R1K28B   Dimensions Width 17.63" (448mm) Height 6.96" (177mm) Depth 29" (737mm) Weight Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg) Available Colors Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED   Expansion Slots (per node) PCI-Express 1 PCI-E 3.0 x16 (LP) + 1 Micro LP MicroLP Adapter Matrix (Networking options)   Drive Bays (per node) Hot-swap (6+2) 3.5" Hot-swap SATA3 HDD trays   Backplane 1x SAS/SATA backplane   System Cooling (per node) Fans 2x 8cm 11k RPM middle fans   Power Supply 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input 1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz DC Output 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification   Platinum Certified   [ Test Report ]   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)