8ANET - Supermicro X12STH-F Motherboard Xeon E-2300 Single Socket LGA-1200 H5 C256 DDR4 SATA3 M.2 PCIe 4.0 Dual LAN Micro-ATX

Intel® Xeon® E-2300 Processor, 10th Generation Intel® Pentium® Processor, Single Socket LGA-1200 (Socket H5) supported, CPU supports Up to 95W TDP
Intel® C256
Up to 128GB ECC UDIMM, DDR4-3200MHz, in 4 DIMM slots
1 PCI-E 4.0 x16
1 PCI-E 4.0 x4 (in x8 slot)
1 PCI-E 3.0 x4 (in x8 slot)
M.2 Interface: PCI-E 3.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-Key
Dual LAN with Intel® Ethernet Controller I210
Intel® C256 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
2 SuperDOM with built-in power
I/O: 1 VGA, 2 COM, 1 TPM header
5x USB 3.2 Gen1 (2 rear, 1 Type-A, 2 via header), 6x USB 2.0 (2 rear, 4 via headers)
Gen12 iGPU support

Specifications:



Processor

CPU	10th Generation Intel® Pentium® Processor, Intel® Xeon® E-2300 Processor Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP
Core	Up to 8 cores, 16 threads



System Memory

Memory Capacity	4 DIMM slots Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz
Memory Type	3200/2933/2666MHz SDRAM
DIMM Sizes	4GB, 8GB, 16GB, 32GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors



On-Board Devices

Chipset	Intel® C256
SATA	Intel® C256 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI	ASPEED AST2600 BMC
Graphics	ASPEED AST2600 BMC
Network Controllers	Dual LAN with Intel® Ethernet Controller I210



Input / Output

SATA	8 SATA3 (6Gbps) port(s)
LAN	2 RJ45 Gigabit Ethernet LAN ports
USB	6 USB 2.0 port(s) (4 via header; 2 rear) 5 USB 3.2 Gen1 port(s) (2 via header; 2 rear; 1 type A)
Video Output	1 VGA port(s)
Serial Port	2 COM Port(s) (1 header; 1 rear)
DOM	2 SATA DOM (Disk on Module) power connector support
TPM	1 TPM Header


Expansion Slots

PCI-E	1 PCI-E 3.0 x4 (in x8 slot), 1 PCI-E 4.0 x16, 1 PCI-E 4.0 x4 (in x8 slot)
M.2	M.2 Interface: 1 PCI-E 3.0 x4 Form Factor: 2280/22110 Key: M-Key



System BIOS

BIOS Type	256MB UEFI
BIOS Features	ACPI 6.0 SMBIOS 2.7 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0



Management

Software	SuperDoctor® 5, NMI, SUM, SPM, Intel® Node Manager, SSM, IPMI2.0, Watchdog
System Management Software	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations	Power-on mode for AC power recovery, ACPI Power Management



PC Health Monitoring

Voltage	VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED	UID/Remote UID CPU / System Overheat LED
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN	6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors Fan speed control 6 fans with tachometer status monitoring Overheat LED indication
Other Features	WOL, UID, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ACPI power management



Operating Environment

Operating Temperature Range	0°C - 50°C (32°F - 122°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non Operating Relative Humidity Range	5% - 95% (non-condensing)

This product is not refundable due to manufacturer return policy. We only replace or repair defective product by RMA procedure.


Terms of Use \| RMA Procedure \| Privacy Policy. Copyright ©1999-2025 8aNet All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Any concern or issues please contact sales@8anet.com.